Packing List; Step 1: Hardware Installation - wanscam JW0009 Quick Installation Manual

Packing List

●IP Camera X1
●DC Power Supply X1
●CD X1
●Certificate of Quality X1
●Warranty Card X1
●Mounting bracket X1

Step 1: Hardware Installation

1. Install the antenna.
2. Plug in the right power supply.
3. Connect the camera to the router (Modem or Switcher) with net cable the first
time you use.
Install the antenna to the back of the camera.Connect the camera to the router,switcher with
net cable. Plug in the power. After a while, the yellow network light at the rear of the camera
will blink and the camera starts to pan and tilt automatically.The green power light will keep on.
The method of the camera connection:
1