Table of Contents
Advertisement
mouse to drag can achieve to select the area, in the area have been selected click the mouse
again to deselect it.
Sensitivity: For the case of motion detection and video shelter, you need to adjust the
sensitivity. Sensitivity divided into high, medium and low.
Alarm delay time: alarm delay time can be set from 5 to 30 seconds.
Alarm handling: The video detection of this system can handle by a variety of ways,
including web upload, send Email, local buzzer and others. You can choose to enable one or
more of treatment for a particular video detection.
Linkage video channel: Customers can link a video detection to a video channel
according to the need. A channel video detection can link to one or multiple video channels.
Only one channel enable the "motion detection" one kind of video recording mode, you
must linkage corresponding video channel for recording. Such as: channel one enable only
the "motion detection" recording mode at a time period, then here, you must select at least
channel one for video linkage.
Linkage PTZ: video detection can also link PTZ.
Alarm delay: When the video detection linkage of a channel or a PTZ recording, you
can set the alarm delay time. Alarm delay time can be set for 5-60 seconds. The factory
default parameters are 5 seconds.
Each channel can be set up easily copied and pasted into other channels.
The enable switch of video detection is the global video detection arm / disarm. If the
enable switch is not turned on, all the settings are not effective.
47
UMD NVR User Manual
Advertisement
Table of Contents
