Page 2
UMD NVR User Manual Statement: In order to make users to quickly learn and master, skill use of embedded HD 9000 series NVR,this manual will cover all operating system processes and requirements, please read this manual carefully before using. This manual applies to all versions V1.1 NVR9000 series models.
Page 3
UMD NVR User Manual a soft brush on the circuit board, connectors, chassis and chassis fan for dust. Please select the appropriate NVR storage hard disk work required to meet long-term requirements of the large amount of data read and write, it is recommended security monitoring dedicated storage hard disk, hard disk storage purchases from the formal channels to ensure quality.
Page 4
UMD NVR User Manual The factory default login user name: "admin", password is "admin", it is strongly recommended that you modify the user name or password after entering the system, improve system security level.
UMD NVR User Manual 1. Introduction 1.1 The purpose of writing To enable customers to use NVR products more easily, specially writing this manual。 This operation manual will be updated time to time, without notice. 1.2 Appearance Appearance information is continuously updated and revised new note 1.2.2 2U Series...
Page 10
UMD NVR User Manual Video output Audio output Talkback input Talkback output VGA Interface Network Interface (RJ45) USB Interface HDMI Interface ALARM IN ALARM OUT ALARM GND RS485 Interface Ground Power fan Power switch 220VAC inlet...
UMD NVR User Manual 2. Operating Instructions 2.1 Menu Item Description 2.1.1【System Settings】menu navigation Main Functional options Main menu Functional options menu items items Basic Set the system time; Preview Open polling enabled; Settings Language Selection; Settings Polling mode settings;...
Page 12
UMD NVR User Manual Detection Detection alarm Channel Video Automatic video selection; alarm Enable ; Set arm and Control Select manual recording; disarm time period; Off Video Detection equipment switch type selection; Alarm output port, alarm linkage video channel settings;...
UMD NVR User Manual 2.1.3【Advanced Options】menu navigation Main menu items Functional options Main menu Functional options items Hard disk The current drive status; System Set automatic restart time; management Set to read-only disc; Maintenance Export Profile; Set to read and write disk;...
UMD NVR User Manual Change Password; Restore the default parameters of alarm setting; Restore the default parameters of network; Restore the default parameters of system; System Upgrade The current system version TV adjustment Up and down about position information; adjustment...
UMD NVR User Manual Version Information Displays version information; Log Information Display the log information; Log Export Internet users Displays network user information; disconnect Internet users; 2.1.5【Close】menu navigation system Main menu items Functional options Log off the system Log off the system...
UMD NVR User Manual 3. Scope of application 3.1 Hardware environment This operating manual applies to NVR9000 family of embedded network DVR type. 3.2 Software Environment This operating manual applies to above V1.0 of software version.
UMD NVR User Manual 4. Basic Operations 4.1 Startup General steps: 2U After ensuring access to the standard 220V AC power, open the power switch on the rear case; at this time total power of the machine is turned on, the machine enter the boot state.
UMD NVR User Manual Through the right mouse button, you can select a single screen, four screens, nine screens, sixteen screens and other display modes. In the 【Main menu】-【System Settings】-【Preview Settings】, the picture can be a combination of round robin setup, to enable polling function.
UMD NVR User Manual Note: Only an administrator has the privileges to change the password. 4.4 PTZ operation You can enter the PTZ control interface through the "PTZ control" in the right-click menu. Refer to Section 5.3.5. 4.5 Recording Control 【Menu】-【General】-【Record Settings】-【Record Ctrl】...
UMD NVR User Manual 4.6 Playback 【Menu】 - 【RecPlay/Export】 or right-click menu "Playback / Backup" may enter the playback interface. Refer to Section 5.3.6. 4.7 Recording data backup In the case of that a removable storage device has been inserted into the USB port, the function of video data backup is enabled.
UMD NVR User Manual After the backup is complete, right-click to exit the backup page. After the backup is complete, right-click to exit the backup page. Note: Do not remove the USB device during backup. 4.8 System Upgrade System upgrade is divided into a local USB upgrade and FTP remote upgrade two ways.
Page 25
UMD NVR User Manual upgrade. After the upgrade is complete, suggesting that the upgrade is complete, the system will automatically restart, and then you can pull out the U disk. Note: The power supply can’t be cut down during the system upgrade, unexpected system crash caused by power outages due to man-made, please sent to the original factory to be resolved;...
UMD NVR User Manual 5. Detailed operation 5.1 System Log Before entering the operating system of sub-pages, generally require the user to log into the system. In the mode of operation of the mouse, you can input by clicking the edit box to load the soft keyboard.
UMD NVR User Manual 5.3 Right menu In order to ensure that customers quickly and easily using the common functions, the system is designed the context menu for mouse operation. 5.3.1 Preview mode 16 channels models Common preview mode settings in the right menu are: single picture, four pictures, eight pictures, nine pictures, sixteen pictures.
Page 28
UMD NVR User Manual Eight-screen preview mode...
Page 29
UMD NVR User Manual Nine-screen preview mode...
UMD NVR User Manual Sixteen-screen preview mode 32 channels models 5.3.2 Screen polling This option is used to turn on / off screen polling status. After opening round of the Tour, the system will follow the mode and switching frequency in the 【Preview Settings】 to achieve...
UMD NVR User Manual 5.3.3 Manual Recording Click on "manual recording" can load 【Video control】 page directly, select or deselect a channel by mouse operation. You can also enter the [Video Control] page through the front panel [Record] button, switch the channel by the "left" and "right" arrow keys, switch video modes by "up"...
UMD NVR User Manual capture channel, and then select shots from the context menu. The captured images can select according to the settings to be transferred to the fixed FTP address through network or saved to removable storage devices, in the case of mobile storage devices connected condition.
Page 33
UMD NVR User Manual Note: IPC itself needs to support PTZ function, the system supports ONVIF PTZ protocol Standing Orders. PTZ function of this system supports multiple control modes, including in accordance with step length movement, continuous movement, according to the...
UMD NVR User Manual 5.3.6 Audio Monitoring In preview mode when you need to listen to a channel, the left mouse button can be used to select the channel, and then click on this switch in the right menu, to achieve the audio output.
UMD NVR User Manual 5.3.7.1 Query video Query window can be set to the desired query. The system supports channel, start and end time, recording type and duration for a combination of search criteria query. In the query window has four search engines, you can search for different conditions simultaneously.
UMD NVR User Manual Playback button: The figure buttons corresponds to playback functions as follows: play, stop, rewind, single frame back, single-frame forward, fast backward, fast forward, previous paragraph, next paragraph, full screen, single screen/four screens, and screenshot. 5.3.7.3 Backup video The buttons in the Backup locking operation area successively are "capture", "backup",...
UMD NVR User Manual 5.3.8 Arm / Disarm Arm and disarm function related the video alarm information linkage settings, you can choose to arm and disarm for the video alarm information, as well as open and close the alarm output linkage mode.
UMD NVR User Manual 5.3.9 Locking System When no operator, the system can be locked. After locking system, the next operation need to re-login system. In 【System Settings】 - 【General Settings】 to set the system automatically locks time.
UMD NVR User Manual 5.4 System Settings 5.4.1 General Settings In the general settings page contains the system time, language selection, window transparency, resolution, the way to write the hard disk, the set of the time that the system will automatically lock and other functions.
Page 40
UMD NVR User Manual System time setting: in the edit box, enter the date and time in accordance with a fixed date and time format, if the digital input exceeds the range of common sense (such as input 25), the system will automatically corrected to 24:00.
UMD NVR User Manual when one mode effect poor, try to replace another connection mode. Note: TCP and UDP mode is limited to support of the RTP protocol. Write the hard disk mode: the case of the hard disk inside the machine are filled with video data, you can choose to stop recording and prompt customer or automatically covered two approaches.
UMD NVR User Manual The factory default setting is all-day recording, video recording mode is timed. Period of time cannot be set cross, and the time period is not available across days. If a certain period of time is not checked any video mode, this period has no video.
UMD NVR User Manual 5.4.4 Preview Settings Preview Settings can control the relevant preview state, including open preview polling depending on the mode and frequency settings, preview capture settings and so on. 5.4.5 Exception Handling This system has a very comprehensive exception handling mechanism, when there is no hard drive, hard disk full, hard disk error, IP address conflict, network cable break, unauthorized access and other anomalies, and the system can be turned to the police.
Page 44
UMD NVR User Manual For each exception you can set variety of approaches include: screen prompts, web upload, send Email, local buzzer and others. You can choose to enable one or more treatment for certain anomalies. For each exception you can use alarm port to export switch quantity alarm signal, each exception can use one-way or multi-way alarm output.
UMD NVR User Manual 5.4.6 Detection alarms All alarms through the probe input in this system known as the "Detection alarms." 1 probe default intercom calls. In the Detection alarms page, you can set arm / disarm time, alarm output port, alarm delay time, alarm handling, linkage video channel, PTZ linkage, video delay time according to the alarm channel.
Page 46
UMD NVR User Manual Alarm output ports: according to customer needs, specify the output port of a channel alarm, this output can output to a separate way, would also have multiple outputs. According to the actual situation of the alarm output back-end device, the alarm switch quantity outputted is set to normally open / normally closed.
UMD NVR User Manual delay time. Video delay time can be set from 5 to 30 seconds. The default factory settings is 10 seconds. Settings of each channel can be easily copied and pasted into other channels. Detection alarms enable switch is the global Detection alarms arm / disarm. If the enable switch is not turned on, all the settings are not effective.
UMD NVR User Manual output. 5.5 Playback Backup Reference to the Section 5.3.6. 5.6 IPC Management IPC management is unique NVR management for IPC, including IPC search, add, delete manage, as well as the channel settings of IPC channel, encoding settings and video detection settings management.
UMD NVR User Manual 5.6.1 IPC add / modify management The system can choose to manually add an IPC; it can also choose to add IPC by automatic search mode. Select “Add IPC” or click on "Search to Add IPC" can load IPC management page, as...
UMD NVR User Manual Add the password: Enter the password of the IPC you want to access systems. Click on the "Add / Edit", you can add the IPC, and it will appear in the list on the left. Automatic Search Add IPC action items: Just click on the "Search to Add IPC"...
UMD NVR User Manual This page can also choose whether to display the time, the channel in the screen. This selection forced in the sub-stream and playback, not real-time preview effect. Covered area settings:For sensitive areas, such as password keyboard area, you can set cover.
Page 52
UMD NVR User Manual separate video transmission. The system is set up for IPC channel coding, so when the newly added one channel, the system will automatically obtain the parameters of the channel to update the information on [encoding settings] page, change the parameter setting is equivalent to a remote setting for the channel.
UMD NVR User Manual rate type. Image Quality: display the channel image quality for the network obtained. There are six levels of image quality, which are the highest, high, medium, low, minimum, in order to reduce image quality. Support remotely changes for channel image quality.
Page 54
UMD NVR User Manual detection area, sensitivity, alarm output port, alarm delay time, alarm handling, linkage video channel, PTZ linkage, video delay time, etc. according to the video channel. The system can obtain network IPC's arm and disarm time, alarm delay time, sensitivity, detection area as well as video detection enable switch status.
Page 55
UMD NVR User Manual mouse to drag can achieve to select the area, in the area have been selected click the mouse again to deselect it. Sensitivity: For the case of motion detection and video shelter, you need to adjust the sensitivity.
UMD NVR User Manual 5.7 Advanced Options 5.7.1 Disk Management Disk Basic Operations In this page, for each SATA port, displaying all the hard disk working condition. Can set each hard disk (to write or read-only), and do the format operation.
UMD NVR User Manual 5.7.2 User Settings Only the factory default admin user has administrative user rights. The system supports user groups, to achieve group rights management. For example, the system user permissions is for maximizing 25, you can choose 20 of them as the purview of a group, the user in this group, its mandate is only less than or equal to these 20 privileges.
Page 58
UMD NVR User Manual group permission settings, you can delete any group except the administrator group. Add user: You can choose to add user to any group except the administrator. You can set permissions lower than or equal to its group permissions for each user. User names and group names cannot be the same.
UMD NVR User Manual At this point, the user can use the “a” user login system, and have administrator privileges. Change the password for the current user: 5.7.3 The system upgrade Upgrade system version. The NVR software version and the WEB version of this system are as a unified version.
UMD NVR User Manual In the system maintenance interface, can set the regular automatic maintenance time of the system. The system configuration file is on every aspect of the system settings file. Backup this file, you can import the configuration file in the case of careful not to restore the default or an unexpected system automatically restore the default, to avoid duplication of work settings.
UMD NVR User Manual module to restore the default settings. Part of the module to restore the default settings must be effective after a system restart. 5.7.6 TV regulation When the video output port on the rear panel of the system is connected to a monitor...
UMD NVR User Manual 5.8 Network settings In this page, the NVR IP address, gateway, network protocol, port number, screenshots upload FTP address can be set. 5.8.1 The basic network settings The basic setup of the network include: the machine's IP address, subnet mask, default gateway, TCP port, UDP port, HTTP port, DHCP enable.
UMD NVR User Manual The default UDP port: 8003 UDP HTTP port: 80 NIC selection: network port one, network port two Network mode: multiple access, load balancing, network fault tolerance When there is a conflict between the port or IP address above and the existing network environment equipment or they are prohibited and cannot be used, replace the parameter.
UMD NVR User Manual 5.8.3 FTP settings The system supports FTP configuration operations to support the "capture image" function FTP upload functionality, the system will run as an FTP client.
UMD NVR User Manual 5.8.4 EMAIL settings The system supports EMAIL function. After the SMTP server and the user name and password information are properly configured, users can use the email function, the alarm information will be sent to the background by the mail.
UMD NVR User Manual 5.8.7 NTP settings The system supports NTP function; it can be used both as an NTP server, but also as an NTP client, namely: NVR can be used either as a clock source, or as a device to be corrected.
UMD NVR User Manual 5.9 System Information 5.9.1 Version Information Provide the current system version information, and the recording channel of the host, alarm channel number etc.
UMD NVR User Manual 5.9.2 Log Information The log query of the system is provided the dual retrieval mode of in accordance with log type, log time. Among them, the log types are divided into: the system log, configure log, alarm log, control log and all logs.
UMD NVR User Manual 5.9.3 Internet users Provide the IP information of the network users connected to this NVR currently. Can disconnect a network users at NVR end. User that is disconnected can log in again at the client attempts to connect.
UMD NVR User Manual 6. Web Client 6.1 Introduction NVR supports to land and manage the device through web pages at the PC side. Web Client systems provide network settings, the basic configuration, user management, advanced configuration management, real-time preview, playback, download and IPC management application modules.
Page 73
UMD NVR User Manual 3, After the connection is successful, the system will pop up the login screen, please enter the user name and password and click the login button to login system. The factory default username is admin, default password is admin.
Page 74
UMD NVR User Manual 5. After a successful login, the user can use the operation of the NVR via web. 6, through the web for NVR playback operation Click the web page in the "Playback download" button, the system will load the replay...
Page 75
UMD NVR User Manual Search results will be displayed in the list, as shown below, the user can choose the video file their concerns directly double-click to playback, and the video will be displayed in the right window. Or click to select a piece of information, then right-two menu "download"...
Page 76
UMD NVR User Manual 7.2.3 The NVR's IP added to the trusted sites, Security -> Trusted Sites -> Sites -> Add to all sites in this zone Require server verification before removing the hook, save 7.3 properly installed controls, not the normal browser if still unable to log in or log video, please delete the cache COOKIE .IE tool options in IE Tools ->...
UMD NVR User Manual 7 Appendix: toxic and hazardous substances or elements in the reference list toxic and hazardous materials or elements component name Cr VI PBDE Sheet metal (case) ...