Connecting To A Smartphone - Canon PowerShot N Supplement Manual

Connecting to a Smartphone

To connect to a smartphone, add it to the Wi-Fi menu as follows.
Also, install the Canon CameraWindow application on the smartphone.
(Camera User Guide =85).
1
In Playback mode, touch [
2
Touch [ ].
3
If a screen requesting the device nickname is displayed, enter the
nickname (= 9 ).
4
Once the camera's SSID and encryption key are displayed, access the
Wi-Fi connection settings on the smartphone. Here, select the SSID
(network name) as displayed on the camera, and in the password field,
enter the encryption key shown on the camera.
5
Start CameraWindow on the smartphone.
6
When the device connection screen is displayed on the camera, touch
the name of the smartphone to connect.
7
Touch and configure the privacy setting, which determines whether
camera images can be displayed on the smartphone.
The smartphone is now connected to the camera, and the image
transfer screen is displayed.
•
The camera remains connected to the smartphone after image transfer.
To disconnect from the camera, touch [^] in the upper right of the screen, and
then touch [OK] on the confirmation screen. You can also use the smartphone
to end the connection.
12
] to access the Wi-Fi menu.