Network - Seiki SE40FO04UK Instruction Manual

Sleep Timer
OSD Timer
Auto Standby
Time zone

Network

• Press MENU button to display the main menu and select NETWORK. Then
press OK to enter.
• Press
buttons to adjust each option's setting.
Network
Configuration
IP Config
Network Info
Network test
26
Select a period of time after which the TV automatically
switches to standby mode: Off/ 10/ 20/ 30/ 60/ 90/120
/180/240 min.
Alternative: You may press the SLEEP button repeatedly
to select the number of minutes directly.
This feature shows how long the On Screen Display will
last. Choosing OSD Timer among off / 10 / 20 / 30 / 60
seconds.
The unit will automatically switch to standby mode Off/3/4/5
hours after the last time the remote control was used. If you
want to operate the TV for a long period of time, turn off the
auto standby function.
This feature can only be used if Auto Sync is set to On. Use
to select the desired time zone the TV is being used in.
buttons to select the following network options and then press
this is preset to cable and cannot be changed.
select either Auto or manual setup mode.
to view all the relevant information concerning your network setup.
to check if your network is working.
CUSTOMIZING TV SETTINGS