Related Manuals for Seiki SE40FO04UK
Summary of Contents for Seiki SE40FO04UK
-
Page 1: Table Of Contents
CONTENTS Important Safety Instructions Safety Information Preparation What is Included Front View Rear View Installing the Base Stand Removing the Stand for Wall-Mounting Remote Control Connecting External Devices General Operation Initial Setup Selecting the Input Source Customizing TV Settings Viewing Recorded Programme Picture Sound Channel... -
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS • Read these instructions – All the safety and operating instructions should be read before this product is operated. • Keep these instructions – The safety and operating instructions should be retained for future reference. • Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. •... -
Page 3: Safety Information
SAFETY INFORMATION This product contains electrical or electronic materials. The presence of these materials may, if not disposed of properly, have potential adverse effects on the environment and human health. Presence of this label on the product means it should not be disposed of as unsorted waste and must be collected separately. -
Page 4: Preparation
PREPARATION What is Included TV Set Remote Control with Batteries Base Stand Eleven Screws Stand Support Quick User Manual Start Guide User Manual Quick Start Guide MINI YPBPR cable MINI AV cable... -
Page 5: Front View
Front View MENU SOURCE VOL- VOL+ 1. IR (Infrared Receiver) Receive IR signals from the remote control. 2. POWER Indicator Illuminate blue when the TV is turned on. Illuminate red when the TV is in standby mode. 3. VOL +/- Press to adjust the volume. -
Page 6: Rear View
Rear View 1. Power Cord COMPONENT&VIDEO share with AUDIO Connect to AC power outlet. IN(L/R)subscribe to. 2. LAN 9. CI Slot Network connection port. Used to insert a CI card. A CI card allows 3. HDMI Inputs you to view all the channels that you Connect to a High-Definition (HD) signal subscribe to. output device. 10. MINI AV 4. -
Page 7: Installing The Base Stand
Installing the Base Stand 1. Lay the TV face-down on a flat, cushioned surface to avoid damaging or scratching. 2.Fix the stand support to the base stand using the 6 provided screws. 3.Fix the stand assembly to the TV using the 5 provided screws. Removing the Stand for Wall-Mounting 1. -
Page 8: Remote Control
Remote Control : Switch the TV between on and standby mode. : Mute and restore your TV sound. 3. 0~9: Select a program. (ATV/DTV mode) 4. CH.LIST: D isplay c hannel l ist.(ATV/DTV mode : Return to previous viewing channel. 6. P.MODE: S elect p icture mode: mild/personal/dynamic. - Page 9 Remote Control...
-
Page 10: Connecting External Devices
CONNECTING EXTERNAL DEVICES Blu-ray Player / Recorder Game Console RF Cable Satellite (not included) Video Camera Antenna Cable Satellite Receiver MINI YPBPR Cable (included) YPBPR Cable (not included) AV Cable (not included) MINI AV Cable (included) Coaxial Cable (not included) SCART Cable (not included) Cable... -
Page 11: General Operation
GENERAL OPERATION Initial Setup • Connect one end of an RF coaxial cable (not supplied) to the aerial socket in your wall. Connect the other end of the cable to the RF ( ) socket in the 75Ω bottom connection panel on the back of the TV. • Attach all other devices to the TV following instructions. - Page 12 • Language is preset to English and can be changed. • Country is preset to UK and can be changed. • Now press the ▼ button on the remote control to select Tuning mode. Use the buttons to select either ATV + DTV (analogue and digital channels), DTV (digital channels only) or ATV (analogue channels only). • Press the ▼ button on the remote control to select Environment. Use the buttons to select between Home Mode or Store Mode. If you select to change to store mode, a warning screen will appear asking if you want to leave home mode.
-
Page 13: Selecting The Input Source
Selecting Input Source You can connect multiple devices to your TV to improve your watching and listening pleasure. • Press the SOURCE button on the main unit or on the remote control to display the Input Source list. • Use the buttons to select the desired input source and press OK button to confirm. -
Page 14: Customizing Tv Settings
CUSTOMIZING TV SETTINGS Viewing Recorded Programme • You can play a recorded programme from the recorded programme list or from the USB storage device. • Note: When inserting the USB device to the USB port at the rear of TV, a message will pop up. Use the buttons to select either Yes or No and press the OK button to confirm. - Page 15 • Use the buttons to select the recorded programme you wish to watch. Note: When you highlight a film to watch, after a few seconds a thumbnail movie will appear on the screen. • When you have found the film you want to watch, press the OK or button to play the recording in full screen mode. • Press the MENU button to display the function bar at the bottom of the screen. buttons to navigate through the functions then press the OK Use the when you have highlighted the one you require. See over the page for a full list...
-
Page 16: Picture
Allows you to select a time to start watching the programme TimePlay from. Allows you to enlarge the Enlarge screen image by multiple pressing OK button: zoom 2 zoom 4 or zoom 8. Shrink Allows you to shrink the screen image of the programme. Playlist Display a full list of recorded videos you can watch. -
Page 17: Sound
CUSTOMIZING TV SETTINGS Choose between Dynamic / Standard / Mild / Personal modes.Alternative:Repeatedly press P.MODE button on Picture Mode the remote control to change the picture mode until you find the one you want. Adjusts the difference between light and dark levels in the Contrast picture. Brightness Increases or decreases the amount of white in the picture. -
Page 18: Channel
CUSTOMIZING TV SETTINGS Choose between Standard / Music / Movie / Sport / Personal modes. Sound Mode Alternative: Repeatedly press S.MODE button on the remote control to change the sound mode until you find the one you want. Treble Use to adjust the amount of treble in the TV's sound. Bass Use to adjust the amount of bass in the TV's sound. Use to adjust the relative volume of the speakers in a Balance multiple speaker system. - Page 19 CUSTOMIZING TV SETTINGS Auto Tuning • Select the Auto Tuning submenu and press the OK button to enter. • Select the tuning type using the buttons, you can choose between DTV + ATV / DTV / Analogue TV. • Country is preset as UK and can be changed.
- Page 20 CUSTOMIZING TV SETTINGS • Press the ▼ button and select Auto Tuning and press the or OK button to start the tuning process. • Once the tuning has finished you can set the Country, Region and Secondary Region using the buttons, confirm our selections by pressing the OK button. Once you have completed all of the settings the menu will close automatically. Analogue Manual Tuning NOTE:This feature is not available in the UK as analogue signals are no longer broadcast.
- Page 21 CUSTOMIZING TV SETTINGS Digital Manual Tuning • Use the ▼ button to select Digital Manual Tuning and press OK on the remote control to enter. • In the DTV Manual Tuning menu. Use the buttons to select the desired UHF channel and then press OK button to commence the search of that channel. When the signal has been tuned, the picture and signal strength will be displayed on the screen.
-
Page 22: Signal Information
CUSTOMIZING TV SETTINGS Signal Information • Allows you to view the signal strength of the selected channel TV signals.Use button to select Signal Information from the menu then press the OK button. CI (Common Interface)(DTV mode) NOTE: this function is available only when the Common Access Module is inserted to the CI slot. This function allows you to view the common interface module information. • Use the button to select CI Information from the menu then press the OK button to enter. - Page 23 CUSTOMIZING TV SETTINGS Fitting the Common Access Module Note: This feature is not available in all countries. 1. Before inserting the Common Access Module, please switch the TV off. 2. If you feel resistance when inserting the CAM, turn it over and try again. 3.
-
Page 24: Lock
CUSTOMIZING TV SETTINGS OAD (Software Update) (Over Air Download) DTV mode The TV auto detects the latest firmware update through the DTV signal and allows you to accept or refuse the firmware upgrade service. • Press the MENU button to display the main menu and select CHANNEL. Use buttons to select Software Update(OAD) to enter. • During normal DTV viewing, if the TV detects firmware upgrade, the Over Air Download screen will appear. Use the buttons to select either Yes or No. Note: If you do not press any button within 1 minute, the Over Air Download screen will disappear. The Over Air Download screen will appear next time you switch to viewing a DTV channel. Lock • Press MENU button to display the main menu and select LOCK. -
Page 25: Time
CUSTOMIZING TV SETTINGS Time • Press MENU button to display the main menu and select TIME. Then press OK to enter. • Press buttons to select the following time options and then press buttons to adjust each option’s setting. Select to turn On or Off Auto Sync. When setting On, the TV will take the time from signals received by the TV Auto Sync through the broadcast signals. -
Page 26: Network
CUSTOMIZING TV SETTINGS Select a period of time after which the TV automatically switches to standby mode: Off/ 10/ 20/ 30/ 60/ 90/120 /180/240 min. Sleep Timer Alternative: You may press the SLEEP button repeatedly to select the number of minutes directly. This feature shows how long the On Screen Display will OSD Timer last. Choosing OSD Timer among off / 10 / 20 / 30 / 60 seconds. -
Page 27: Setting
CUSTOMIZING TV SETTINGS Setting • Press MENU button to display the main menu and select SETTING. Then press OK to enter. • Press buttons to select the following setting options and then press buttons to adjust each option’s setting. The on screen display language is set to English and can Language be changed. -
Page 28: Entertainment
ENTERTAINMENT Allows you to select the OSD language and the country First where you will operate the TV. Then it will search Time Installation automatically for TV programmes. Software Upgrade the TV software through USB. Update (USB) Restore Restores all settings to factory defaults. Factory Default Turn on Consumer Electronics Control(CEC) so that you can control up-to 15 CEC-enabled devices that are connected through HDMI directly from one remote control. -
Page 29: Viewing Movies
ENTERTAINMENT NOTE: Before entering MultiMedia, an USB disk shall be inserted to USB port. • Press the MENU button to select the MultiMedia, and then press OK button to enter. Viewing Movies Note: there may be more than one USB device attached to TV, please select the desired one. 1. After entering MultiMedia, press tubuttons to select Movies and then use OK button to enter. 2. -
Page 30: Listening To Music
ENTERTAINMENT Listening to Music 1. After entering MultiMedia, press tubuttons to select Music and then use OK button to enter. 2. Then use buttons to navigate in the music folder and then select the audio file to enter. Note: when navigating in audio file, a thumbnail screen will appear. 3. Press OK or to enjoy the music in full screen. -
Page 31: Viewing Photos
ENTERTAINMENT Viewing Photos 1. After entering MultiMedia, press tubuttons to select Photos and then use OK button to enter. 2. Then use buttons to navigate in the photo folder and then select the picture file to enter. Note: when navigating in picture file, a thumbnail screen will appear. 3. Press OK or to view the picture in full screen. 4. -
Page 32: Files
ENTERTAINMENT Files 1. After entering MultiMedia, press tubuttons to select Files and then use OK button to enter. 2. Then use buttons to navigate in the files folder. When you find the music or photo file you want to view and press the OK button to enter. You will now be taken automatically to the photo or music browser. 3. See the instructions for using the music and photo browsers on pages 31 and 32 in these instructions for more information. -
Page 33: Using The Features
USING THE FEATURES Electronic Programme Guide(EPG)(DTV mode) Your TV has an Electronic Programme Guide (EPG) to help you navigate through all your possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in EPG (the availability and amount of programme information will vary, depending on the particular broadcast). -
Page 34: Viewing Teletext(Dtv Mode)
USING THE FEATURES Viewing Teletext(DTV mode) IMPORTANT: Before viewing Teletext you will need to turn the Subtitle function off if it is switched on. Note: Before turning Teletext on, check that the TV channel you are watching transmits Teletext. If it does not, NO Teletext will be shown on the screen. • Press the TEXT button on the remote control to open the Teletext menu. -
Page 35: Time Shift Function(Dtv Mode)
USING THE FEATURES Time Shift Function(DTV mode) This function allows you to quickly record the TV programme you are watching if you have to leave the room. IMPORTANT: You must have a USB storage device attached to your TV to use the Time Shift function. IMPORTANT: If the transfer rate of the attached USB storage device is too slow for the Time Shift function, a warning statement will be shown on the TV's screen. If this happens, please upgrade your USB storage device. IMPORTANT: Time Shift mode may not work if the station's signal strength is too weak. - Page 36 USING THE FEATURES The Time Shift progress bar Use the buttons to navigate through the progress bar. Once you have selected the feature you wish to use press the OK button. • Shows the channel and name of the recorded programme. • PLAY: Select to play your recording. • STOP: Select to stop play back. •...
-
Page 37: Recording Dtv Programmes(Dtv Mode)
USING THE FEATURES Recording DTV Programmes(DTV mode) You can record digital TV programs onto a USB drive using either direct recording by pressing the red dot button or by using the program timer function. NOTE: An USB disk must be inserted to the USB port on TV. Instant recording This option is used to record the program you are watching. • Press record button on the remote control to record the programme you are currently watching. -
Page 38: Programme Timer(Dtv Mode)
USING THE FEATURES Programme Timer(DTV mode) The programme timer is used to schedule program recordings. Note: There may be a small delay when the program starts recording. Always ensure a USB drive is inserted into the USB slot in the back of the TV. If not, a warning message will appear on the TV screen. - Page 39 USING THE FEATURES • After making all of your adjustments press the OK button to confirm your settings. The Timer was saved Successfully screen will appear. • The Schedule List will now appear at the bottom of the screen showing all of your scheduled recordings.
-
Page 40: Digital Reception
DIGITAL RECEPTION MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Profile 1 - for UK Object carousel support compliant with ISO/IEC 135818-6 and UK DTT profile - for UK Frequency range: 474-850 MHz for UK models 170-862 MHz for EU models Transmission standard: DVB-T. MPEG-2 Demodulation: COFDM with 2K/8K FFT mode FEC: all DVB modes Video: MP@ML, PAL, 4:3/16:9 Audio: MPEG Layer I&II 32/44.148kHz. We apologise for any inconvenience caused by any minor inconsistencies in these instructions, which may occur as a result of product improvements and development. SUPPORTED FILE FORMATS... -
Page 41: Troubleshooting
TROUBLESHOOTING If your TV does not operate normally or cannot be turned on, please check the following troubleshooting questions. Remember also to check any other connected electronic device, such as DVD or Blu-ray player to pinpoint the problem. If the TV still fails to operate normally, please contact technical support. The TV does not operate properly • The TV may freeze up during use. Disconnect the power The TV does not respond... -
Page 42: Maintenance
TROUBLESHOOTING The audio function does not work • Press the VOL +/- buttons. • Sound muted? Press the MUTE button. Picture OK but no sound • Try another channel. The problem may be caused by the broadcaster. No output from one of the • Adjust the Balance settings in the AUDIO menu. speakers • A change in ambient humidity or temperature may result in Unusual sound from inside an unusual noise when the TV is switched on or off and does the TV... -
Page 43: Specification
SPECIFICATION Panel Size 40 inch diagonally Display Type Panel Technology Panel 60 Hz Vs. 120 Hz 60 Hz Display Resolution 1080P Panel Resolution 1920 x 1080 Aspect Ratio 16:9 Dynamic Contrast Ratio-Panel 5000:1 Brightness (Centre Typ.) Cd/M² 200~250 Response Time (G To G) Lamp Life (Typ. Hours) 30,000 hours Horizontal Viewing Angle (At CR>10) Vertical Viewing Angle (At CR>10) Wall-mount(LxW-mm) 200*200(mm) -
Page 44: Limited Warranty
PARTS : For a period of one (1) year from the date of original consumer purchase, SEIKI will supply, at no charge to the original consumer, new, rebuilt or refurbished replacement parts in exchange for defective parts. After the one (1) year Warranty period, you must pay for the costs of all parts.