General Operation; Initial Setup - Seiki SE40FO04UK Instruction Manual

GENERAL OPERATION

N

Initial Setup

• Connect one end of an RF coaxial cable (not supplied) to the aerial socket
in your wall. Connect the other end of the cable to the RF (
bottom connection panel on the back of the TV.
• Attach all other devices to the TV following instructions.
• Connect the TV's mains cable into a wall socket and turn the power on if
required.
• In standby mode, press the
to turn the TV on. The red LED indicator will turn blue.
• The first time you turn your TV on it will go straight to the Welcome screen.
Press the EXIT button to go to the No Signal screen.
• After pressing the OK button you will go to the First Time Installation menu.
button on the main unit or on the remote control
Local Rates
Apply
) socket in the
75Ω
11