When installing:
• Insert the notched end of the memory module into the memory slot. Insert the memory module into the
memory slot at an angle of about 20 degrees. Pivot the memory module downward until it snaps into
place. Ensure that the memory module is firmly installed in the memory slot and cannot be moved easily.
• Ensure that the base cover assembly is attached firmly; otherwise, battery connection may fail.
1060 Wireless LAN card
For access, remove this FRU:
•
"1020 Base cover assembly" on page 71
2
1
1
.
Chapter 9
Removing or replacing a FRU
77