Recessed Installation - Napoleon B42NTR Installation And Operating Instructions Manual

5.5

RECESSED INSTALLATION

INSTALLING A TELEVISION OR OTHER ELECTRONICS ABOVE THE APPLIANCE MAY CAUSE
DISCOLOURATION, MELTING OR DAMAGE TO THE ELECTRONICS. USE CLEARANCES AS GUIDELINES
AND REFER TO YOUR MANUFACTURER'S INSTRUCTIONS FOR FURTHER INFORMATION.
Before placing anything above a heat source, it is advisable to follow proper clearances and
manufacturer's instructions.
A. When a mantel is installed between the appliance and an electronic device or other materials, the
effect of direct heat on the electronics or other materials will be reduced. Follow mantel height and
depth instructions for proper clearances. NOTE: Increasing the horizontal length of the mantel will
further reduce the intensity of heat on the electronics.
B. Refer to "MINIMUM MANTEL CLEARANCES" section for more detailed mantel clearance information.
WARNING
!
A
B
MINIMUM CLEARANCES CHART
A 6" (152mm) MAX
B 10" (254mm) MIN
41 5/8" (1057mm) (REAR VENT)
C
C 50 1/2" (1283mm) (TOP VENT)
*See "MINIMUM ENCLOSURE CLEARANCES" section
C
W415-1293 / C / 07.28.16
41
EN