Brother MFC-J285DW Quick Setup Manual page 4

a
Make sure that the power is turned on.
The Touchscreen will show No Ink
Cartridge.
NOTE
You can adjust the control panel angle to read the
Touchscreen more easily. Hold the edge of the
control panel to avoid accidentally pressing any of
the Touchscreen options.
b
Open the ink cartridge cover a.
c
Remove the orange protective part a.
NOTE
Do not throw away the orange protective part.
You will need it if you transport the machine.
d
Unpack the ink cartridge.
Turn the green release lever on the orange
protective packing a counterclockwise until it
clicks to release the vacuum seal. Then
remove the orange protective packing a as
shown.
4
1
1
IMPORTANT
• DO NOT shake the ink cartridges. If ink stains
your skin or clothing, wash with soap or
detergent at once.
• DO NOT touch the cartridge in the area
indicated b, as this can cause the machine not
to function with the cartridge.
e
Take care to match the sticker color a with the
cartridge color b as shown in the diagram
below.
Install each ink cartridge in the direction of the
arrow on the label.
2
1
2
1
1
2