Sunbeam 20060328 Service Manual page 23

WARNING: THE SIGNALING CARDS ELECTRIC FEEDING DEPENDS ON THE REFRIGERATORS
ENTRY TENSION. IT IS NOT A DIGITAL SIGN, KEEP CAUTION WHEN MANIPULATING ONE OF THEM.
IT IS MANDATORY TO DISCONNECT THE REFRIGERATOR TO OPERATE THE CARDS.
Assemble of card with the refrigerator.
The cards include fast connectors with a signal that allows each terminal link appropriately, depending on the
refrigerator's model. One of the terminals has a yellow or light blue indication. This signaling point will always be in a two-
cable terminal and in the card, in the respective plug.
To unscrew the indicator use a clasp knife, insert it through the edge and pull backwards softly. The piece has two N°4
self - threaded screws that should be removed if the card is replaced. When re –screwing the new card, make sure not to
give an excessive switch, as it would damage the indicator threads and loose the plastic piece.
PAGE. B16