Technical Specifications Pro-Ject Switch Box S; Service; Warranty; Copyright, Trademarks - Pro-Ject Audio Systems Switch Box S Instructions For Use

Hide thumbs Also See for Switch Box S:

Table of Contents

Technical specifications Pro-Ject Switch Box S

Gain:

Line-level inputs:

Line-level outputs:

Trigger:

Trigger in:

Outboard power supply:

Power consumption:

Dimensions W x H x D (D with sockets): 103 x 36 x 104 (109)mm

Weight:

Should you encounter a problem which you are not able to alleviate or identify despite the above information,

please contact your dealer for further advice. Only when the problem cannot be resolved there should the

unit be sent to the responsible distributor in your country.

The manufacturer accepts no responsibility for damage caused by not adhering to these instructions

for use. Modification or change to any part of the product by unauthorized persons, release the

manufacturer from any liability over and above the lawful rights of the customer.

Pro-Ject Audio Systems is a Registered Trademark of

H. Lichtenegger.

This guide was produced by: Pro-Ject Audio Systems

0dB

1 pair RCA/phono sockets, 3 x 3-pole 3,5mm co-axial jack

1 pair RCA/phono sockets, 1 x 3-pole 3,5mm co-axial jack

digital switching signal

2-pole 2,5mm co-axial jack

9V/300mA DC, suitable for your country's mains supply

30mA DC

580g without power supply

The information was correct at the time of going to

press. The manufacturer reserves the right to make

changes to the technical specification without prior

notice as deemed necessary to uphold the ongoing

process of technical development.

Table of Contents

Do you have a question about the Switch Box S and is the answer not in the manual?