Safety Instructions; Connectors; Outputs; Inputs - Pro-Ject Audio Systems Switch Box S Instructions For Use

Dear music lover,
thank you for purchasing a Pro-Ject Audio Systems´ input expander.
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
Warning of a hazard for the user, the unit or possible misuse
!
Important notice

Safety instructions

Please note that the back side of front panel edges can be sharp! Please handle carefully!
AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the
voltage in your area meets the voltage requirements printed on the power supply.
The power supply is used to connect/disconnect the unit from the mains. Make sure that the power
supply is easily accessible at all times. Never handle the device, the power supply while your hands are
!
wet or damp.
Avoid letting liquids enter the device or the power supply. Never place any item containing liquid,
such as a flower vase on or near the device. Never spill any liquid on the device or the power supply.
Never place any naked flame sources, such as lighted candles on or near the device. The product shall not
be used in damp or wet locations, next to a bathtub, sink, swimming pool or any other similar conditions.

Connectors

Make all connections whilst the input expander is disconnected from the power supply.
Take care to connect the left and right channels correctly. The right channel is usually marked red,
!
the left channel black or white.
Never use any other power supply than the one supplied with the unit.

Outputs

Out has to be connected to the In 2 of the Pro-Ject Pre Box S. Out 2 can be used to connect a Pro-Ject
headphone amplifier, like the Head Box S ore the Head Box DS.

Inputs

Line level sources such as CD player tuner or TV can be connected to the input sockets marked In 2 - In 5.
2
© Pro-Ject Audio Systems · Pro-Ject Switch Box S (from S/N: F37853) · Revision 2015.10.30.