Philips srp3014 User Manual page 8

4
When the device is off, immediately press
and release OK to save the code. The blue
LED indicator will turn off.
max. 20
minutes
5
Operate the device with the universal
remote. If your device responds correctly, it
means you have saved the right code.
Note
•
Auto registration can be reversed, by pressing and
releasing once more during the auto registration
process. This is helpful if you missed out the chance to
press OK within 2 seconds. Make sure that the device
is first powered on again.
•
Repeat the same procedures to set up other devices.
•
It is possible sometimes that your device only responds
to some of the buttons. In such case, set up with the
next code in the code list, and try operating your
device again.
EN
6