4 Service and
Frequently asked questions
My universal remote does not work at all.
Check if you have correctly setup the
device with the right code.
Check if you have pressed the
corresponding device key for your device.
Check if the batteries are inserted
properly. If the battery level is low, replace
Check if your device is powered on.
If several device codes are listed under the
brand of my device, how can I select the
correct device code?
To seek the correct device code, test the codes
one by one. The codes are sorted by popularity,
and the most popular code is listed first.
My device responds only to some of the
You have set a code for which only some
commands work properly but some do not. Try
other codes until most keys work properly.
We advise you to first read this user manual
carefully. It helps you set up and use the
If, however, you require extra information or
have additional questions about setup, usage,
warranty, etc of the SRP3014, you can always
When calling our helpline, make sure to have
the SRP3014 at hand when you call, so that our
operators can help you determine whether
SRP3014 is working properly.
You will find our contact details at the end of
this user manual.
For online support, visit