Universal Access - Philips 7600 series User Manual

Manual
To set the TV clock manually...
1 - Press  , select All Settings and press OK.
2 - Select General Settings and press  (right) to
enter the menu.
3 - Select Clock > Auto Clock Mode, and
select Manual.
4 - Select Date and Time to adjust.
5 - Press  (left) repeatedly if necessary, to close
the menu.
Time Zone
To set the time zone...
1 - Press  , select All Settings and press OK.
2 - Select General Settings and press  (right) to
enter the menu.
3 - Select Clock > Time Zone, and press OK.
4 - Select one of the time zones.
5 - Press  (left) repeatedly if necessary, to close
the menu.
Sleep Timer
With the Sleep Timer, you can set the TV to switch to
Standby automatically after a preset time.
To set the Sleep Timer...
1 - Press  , select All Settings and press OK.
2 - Select General Settings and press  (right) to
enter the menu.
3 - Select Sleep Timer and press  (right). With
the slider bar you can set the time to up to 180
minutes in increments of 5 minutes. If set to 0
minutes, the Sleep Timer is switched off. You can
always switch off your TV earlier or reset the time
during the countdown.
4 - Press  (left) repeatedly if necessary, to close
the menu.
15.7

Universal Access

Switch On
With Universal Access switched on, the TV is
prepared for use for the deaf, hard of hearing, blind or
partially sighted people.
Switch on
If you did not switch on Universal Access during the
installation, you can still switch it on in Universal
Access menu.
To switch on Accessibility...
1 - Press  , select All Settings and press OK.
2 - Select Universal Access and press  (right) to
enter the menu.
3 - Select Universal Access one step further.
4 - Select On and press OK.
5 - Press  (left) repeatedly if necessary, to close
the menu.
With Universal Access switched on, the
option Universal Access is added in the Options
menu.
Hard of Hearing
Some digital TV channels broadcast special audio and
subtitles adapted for the hard of hearing or deaf
people. With Hearing impaired switched on, the TV
automatically switches to the adapted audio and
subtitles, if available. Before you can switch
on Hearing impaired, you have to switch
on Universal Access.
To switch on Hearing impaired...
1 - Press  , select All Settings and press OK.
2 - Select Universal Access and press  (right) to
enter the menu.
3 - Select Hearing impaired and press  (right) to
enter the menu.
4 - Select On and press OK.
5 - Press  (left) repeatedly if necessary, to close
the menu.
To switch on Hearing impaired while watching TV...
1 - While watching a TV channel,
press  OPTIONS , select Universal Access and
press OK.
2 - Select Hearing impaired, and select On.
To check whether a hearing impaired audio language
is available, press  OPTIONS , select Audio
Language and look for an audio language marked
with a  .
If Accessibility does not appear in the Options menu,
switch on Universal Access in setup menu.
Audio Description
Switch On
Digital TV channels can broadcast special audio
commentary describing what is happening on
screen.
To be able to set the visually impaired audio and
effects, you have to switch on Audio
Description first.
Also, before you can switch on Audio Description,
you have to switch on Universal Access in setup
menu.
62