Philips 7600 series User Manual page 49

Light Sensor
The Light Sensor adjusts the picture and Ambilight
settings automatically to the lighting conditions of the
room. You can switch Light Sensor on or off.
To switch on or off...
1 - Press  , select All Settings and press OK.
2 - Select Picture and press  (right) to enter the
menu.
3 - Select Advanced > Contrast > Light
Sensor, and press OK.
4 - Select On or Off.
5 - Press  (left) repeatedly if necessary, to close
the menu.
Gamma
With Gamma, you can set a non-linear setting for
picture luminance and contrast. Gamma is a setting
intended for expert users.
To adjust the level...
1 - Press  , select All Settings and press OK.
2 - Select Picture and press  (right) to enter the
menu.
3 - Select Advanced > Contrast > Gamma, and
press OK.
4 - Press the arrows  (up) or  (down) to adjust
the value.
5 - Press  (left) repeatedly if necessary, to close
the menu.
Sharpness Settings
Ultra Resolution
With Ultra Resolution, you switch on a superior
sharpness in line edges and contours.
To switch on or off...
1 - Press  , select All Settings and press OK.
2 - Select Picture and press  (right) to enter the
menu.
3 - Select Advanced > Sharpness > Ultra
Resolution, and press OK.
4 - Select On or Off.
5 - Press  (left) repeatedly if necessary, to close
the menu.
Noise Reduction
With Noise Reduction, you can filter out and reduce
the level of image noise.
To adjust the noise reduction...
1 - Press  , select All Settings and press OK.
2 - Select Picture and press  (right) to enter the
menu.
3 - Select Advanced > Sharpness > Noise
Reduction, and press  (right) to enter the menu.
4 - Select Maximum, Medium, Minimum or Off.
5 - Press  (left) repeatedly if necessary, to close
the menu.
MPEG Artefact Reduction
With MPEG Artefact Reduction, you can smoothen
the digital transitions in the picture. MPEG artefacts
are mostly visible as small blocks or jagged edges in
images.
To reduce the MPEG artefacts...
1 - Press  , select All Settings and press OK.
2 - Select Picture and press  (right) to enter the
menu.
3 - Select Advanced > Sharpness > MPEG
Artefact Reduction, and press  (right) to enter the
menu.
4 - Select Maximum, Medium, Minimum or Off.
5 - Press  (left) repeatedly if necessary, to close
the menu.
Motion Settings
Perfect Natural Motion
With Perfect Natural Motion, you can reduce the
motion judder, visible in movies on TV. Perfect Natural
Motion makes any movement smooth and fluent.
To adjust the motion judder...
1 - Press  , select All Settings and press OK.
2 - Select Picture and press  (right) to enter the
menu.
3 - Select Advanced > Motion > Perfect Natural
Motion, and press OK.
4 - Select Maximum, Medium, Minimum or Off.
5 - Press  (left) repeatedly if necessary, to close
the menu.
Picture Format
Basic
If the picture is not filling the whole screen, if black
bars are showing on the top or bottom or at both
sides, you can adjust the picture to fill the screen
completely.
To select one of the basic settings to fill the screen...
1 - While watching a TV channel, press  .
2 - Select Picture Format > Fill Screen or Fit to
Screen, and press OK.
49