How To Use; Start Up; Pair; Increase/Decrease Sensitivity - iPazzPort KP-810-27R User Manual

6.How to use

6.1.Start up

1. Open the lid
3.Install the battery
6.2.Pair:press the OK button and TV button at the same time, the LED will
flick, the plug USB dongle into the computer ande android USB
interface, LED light will stop flicking, then pairing is succeeded.
6.3.Increase sensitivity:Press "OK" and "Vol +" at the same time, LED light
Decrease sensitivity:Press "OK" and "Vol -" at the same time, LED light
will flicker for about 1 sec, that means sensitivity
is increasing.
will flicker for about 1 sec, that means sensitivity
is decreasing.
2. Take USB receiver out
4. Cover the lid