Advertisement
Quick Links
KWM1935/KWM1940
UHF wireless microphone systems
M A N U A L
V E R S I O N
1 . 0
0 1 / 0 6 / 1 2
Due to continuous product development, please ensure that you have downloaded
the latest instruction manual for this product from the Kam website at www.kam.co.uk
For the latest updates and information on the entire Kam range visit:
www.kam.co.uk
Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ
Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com
Due to continuous product development, specifications and appearance are subject to change. © Copyright Lamba plc 2012. E&OE.
M
A
D
E
I
N
C
H
I
N
A
Advertisement
Related Manuals for KAM KWM1935
Summary of Contents for KAM KWM1935
- Page 1 For the latest updates and information on the entire Kam range visit: www.kam.co.uk Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com...
- Page 2 Thank you for purchasing this Kam product, we are sure that it will serve you for many years to come. To optimise the performance of this product, please read these operating instructions carefully to familiarise yourself with the basic operations of this unit. Please retain them for future reference.This unit has been tested at the factory before being shipped to you.
- Page 3 KWM1935 - front panel Power switch Channel selector panel (see below for channel selection instructions) Power status LED RF signal indicator led - lights when the receiver is receiving a signal from the transmitter. Volume control KWM1935 - rear panel Power inlet Squelch sensitivity adjust.
- Page 4 There are 16 channels available and each channel has a specific frequency factory assigned to it. Both the KWM1935 & KWM1940 use the same 16 frequencies. The table below shows the 16 different channels, the frequencies assigned to those channels and the various DIP switch settings used to choose a particular channel.
- Page 5 Channel/frequency table Channel 1 Channel 2 863.00MHz 863.40MHz Channel 3 Channel 4 863.80MHz 864.20MHz Channel 5 Channel 6 864.60MHz 863.20MHz Channel 7 Channel 8 863.60MHz 864.00MHz Channel 9 Channel 10 864.40MHz 864.80MHz Channel 11 Channel 12 863.10MHz 863.30MHz Channel 13 Channel 14 863.50MHz 863.70MHz...
- Page 6 Specifications Carrier frequencies: UHF 863 - 865 MHz Frequency stabilization: <+/-30ppm Dynamic range: >90dB Harmonic distortion: <0.5% Frequency response: 40Hz~15KHz +/-3dB Receiver power: DC15V Transmitter power: 8.5mV Battery voltage: 3V Continuous usage: 6 hours S/N Ratio: >90dB...