4.17 DC-IN cable, RGB Board and RJ45 cable
Installing DC-IN cable, RGB Board and RJ45 cable
Install the DC-IN cable, RGB Board and RJ45 cable to the following procedures and Figure
4-28.
1. Seat the RJ45 cable in the correct position.
2. Seat IO bracket cover in the correct position of IO bracket, then secure it with
3. Seat IO bracket and IO bracket cover in the correct position of top cover then
4. Seat the DC-IN cable in the correct position.
5. Seat the RGB board in the correct position.
6. Secure the RGB board with two M2x3 black flat head screws.
7. Connect the RGB cable to CN9600 on the RGB board.
8. Secure the RGB board cable with one M2x3 black flat head screw.
Satellite/E200/E205
Downloaded from LpManual.com Manuals
two M2x3 black flat head screws
secure them with two M2x3 black flat head screws.
Maintenance Manual
4 Replacement Procedures
4-47