Denon AVRS720W Owner's Manual page 202

Contents Connections
o Notifications
When the latest firmware is available, a notification message is
displayed on the TV screen at power on.
The notification message is displayed for about 40 seconds when the
power is turned on.
Update
On
(Default):
Off:
Upgrade
On
(Default):
Off:
Front panel Display
Playback
Display update message.
Do not display update message.
Display upgrade message.
Do not display upgrade message.
Rear panel
Settings
o Add New Feature
Display new features that can be downloaded to this unit and perform
an upgrade.
Upgrade Package:
Upgrade Status:
Upgrade Start:
0 See the Denon website for details about upgrades.
0 When the procedure is complete, "Registered" is displayed in this menu and
upgrades can be carried out. If the procedure has not been carried out, "-------"
is displayed.
The ID number shown on this screen is needed when carrying out the
procedure.
The ID number can also be displayed by pressing and holding the main unit's
ZONE2 SOURCE and TUNE + for at least 3 seconds.
0 If the upgrade is not successful, an error message identical to those in
"Firmware" - "Update" will appear on the display. Check the settings and
network environment and then perform the upgrade again.
202
Remote
Tips Appendix
Display the items to be upgraded.
Display a list of the additional functions
provided by the upgrade.
Execute the upgrade process.
When the upgrade starts, the menu
screen is shut down. During the upgrade,
the amount of upgrade time which has
elapsed is displayed.
Index