Sharp LC-32SH25E Service Manual page 25

LC-32SH25E
1.2 Connect to TV USB port to upgrade the software firmware
Please follow the following step to upgrade the firmware.
1. Copy the software firmware (*.pkg) to USB Disk.
2. Modify the pkg's filename to "upgrade.pkg"
3. Insert the USB Disk to TV USB port.
4. TV AC power off -> AC power on
5. TV will upgrade by itself after detect the USB disk condition and the content of the pkg file.
Note: TV's Green LED will flash during upgrade process
6. After finish upgrade process, TV will reboot by itself.
7. Remove USB disk from TV.
8. Check the software version is correct or not.
(Menu / setup / Current software info)
2008-03-14
25