Table of Contents
Advertisement
5. Slide the keyboard frame backward by 2.5 mm (0.1 inch) with the flat end of the keyboard multi-tool.
Hide the latches of the keyboard frame under the keyboard bezel by pushing the latches with your
finger as shown.
6. Adjust the keyboard frame in place with the flat end of the keyboard multi-tool to ensure that all the
latches are secured under the keyboard bezel.
1040 Storage-drive stabilizer bar, internal storage drive, and hard disk
drive cable
For access, remove this FRU:
•
"1010 Removable battery" on page 67
•
"1020 Base cover assembly" on page 68
Attention:
• Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper
handling can cause damage and permanent loss of data.
9
9
10
.
Chapter 8
Removing or replacing a FRU
75
Hide quick links:
Advertisement
Table of Contents
