Wiring The Power/Data Cable - NorthStar Explorer 660 Installation And Operation Manual

16-5 Wiring the power/data cable

1 Wire the power:
Either Basic wiring: When the main
•
switch is on, the Explorer 660 must be
powered on manually with the
engine hours counter and fuel counter
are disabled.
Or Auto power wiring: The Explorer 660
•
turns on and off automatically when the
ignition is turned on and off. The engine
hours counter and fuel counter are
enabled. Choose auto power when the
optional fuel kit is fitted.
Note: With auto power, the Explorer 660
can not be turned off using the
2 Wire any external beepers or lights. If the
current is more than 200 mA, fit a relay.
3 The power/data cable has a plug with a black
collar. Plug this plug into into the connector
with a black nut on the back of the Explorer
660. Turn the collar to lock the connector.
66
key. The
key.
Northstar Explorer 660 Installation and Operation Manual
Basic wiring
Fuse 2 A
Main
switch
12/24 V DC
Auto power wiring
Ignition
Fuse 2 A
Ignition
switch
Fuse 2 A
Main
switch
12/24 V DC
Wiring external beepers or lights
External
beepers or
lights
Red
Yellow
Black
Power/data
cable
Yellow
Red
Black
Power/data
cable
Red
Green
Power/data
cable