Changing The Brake Light; Changing The Fuse - SHERCO XY 125 Owner's Manual

Changing the brake light

B

Changing the fuse

A
B
ATTENTION
This operation should be performed with the igni-
tion off.
Removal:
- Remove the 3 screws and washers
rear mudguard.
- Disconnect the wiring terminal
- Remove the brake light.
Type: the brake light is a LED unit and the complete
assembly needs to be renewed.
A
Refi tting:
- To refi t, proceed in reverse order to removal.
ATTENTION
This operation should be performed with the igni-
tion off.
The fuse is situated below the fi lter housing, and
therefore the following have to be removed:
- The seat (Seat chapter).
Removal:
- Remove the rear mudguard by removing the
front screw
- Remove the box-fi lter support
the air fi lter box.
B
A
.
B
A
from the
.
together with
53 53