Specifications - Garmin GSD 26 Installation Instructions Manual

LED State Status
Color
connected to the chartplotter and this code
persists, check the wiring connections.
Red/ Slow blink The sounder is in test mode.
Green
Red Rapid blink System error. The chartplotter displays a
sequence message indicating the type of failure. When
the error condition is fixed, the sounder must
be completely disconnected from and
reconnected to its power source to clear the
error.

Specifications

Size L x W x H: 274 x 373 x 100 mm (10.8 x 14.7 x
3.9 in.)
Weight 5.16 kg (11.37 lb.)
Case material Fully gasketed, aluminum and steel housing
with plastic access panel, water resistant to
IEC 60529 IPX7.
Temperature range From 5 to 158°F (from -15 to 70°C)
Power input 10–35 V
Power usage 100 W maximum
Fuse 10 A
Compass safe distance 60 cm (23.6 in.)
Sounder power 25-3,000 W (RMS)*
Frequency 25-210 kHz (dependent on transducer)
Depth 3,048 m (10,000 ft.)**
Data output Garmin Marine Network
*Dependent on transducer rating and depth
**Maximum depth dependent on transducer, water salinity,
bottom type, and other water conditions.
5