Satellite Link - Toshiba RD-XV45KB Instruction Manual

E439BBD_EN.book Page 38 Wednesday, May 31, 2006 4:01 PM
Hints for Timer Recording
The priority of overlapped settings:
When the Timer Programmings are overlapped, you
will receive a warning message.
If this happens, check the Timer Programming List
and change it as necessary. Otherwise, the unit will
prioritize recording as described below.
If the starting time is same:
• The Timer Programming set first (PROG. 1) has
priority.
PROG. 1
PROG. 2
Actual
PROG. 1
recording
The first 15 seconds (approx.) will be cut off.
Different start time and different end time:
• A program with the earlier start time has the priority.
PROG. 1
PROG. 2
PROG. 3
Actual
PROG. 1
recording
The first 15 seconds (approx.) will be cut off.
If the recording time entirely overlaps:
• The shorter Timer Programming (PROG. 2) is not
recorded.
PROG. 1
PROG. 2
Actual
recording
If the End time of the programme currently being
recorded and the Start time of the subsequent
programme are same:
• If PROG. 1 is a DVD recorded programme, the
beginning of PROG. 2 may be cut off.
PROG. 1
PROG. 2
Actual
recording PROG. 1
The last 30 seconds (approx.) will be cut off.
* The amount of time cut off differs depending on
the recording media.
38
EN
PROG. 2
recording
will start
after
PROG. 1
recording is
PROG. 2
completed.
PROG. 3
PROG. 2
PROG. 1
PROG. 2

Satellite Link

You can set the unit to start recording whenever it
detects the scart control signal from the external
tuner.
• This feature is only available to HDD.
Preparing for the Satellite Link Timer Recording:
[Preparation of the external tuner]
• The external tuner should be equipped with
some kind of timer function. Using timer function
of the tuner, set it to be turned on when it comes
to the time you want to start recording, and off
when it comes to the time you want to finish
recording. (Refer to the tuner's manual on how
to set the timer.)
• Make sure to turn off the external tuner when
you finish setting.
[Preparation of this unit]
• Make sure to select the desired Recording
mode beforehand.
External tuner
(not supplied)
Scart cable (not supplied)
HDD / DVD / VCR
AV2 (DECODER)
AV1 (TV)
1
Press [SETUP].
Setup Menu will appear.
2
Select "Timer Program" using
[Cursor / ], then press [ENTER].
U D
Advanced Menu
Satellite Link
DVD Menu
Timer Program
HDD Menu
Initial Setup
Timer Program
Easy Setting Menu
3
Select "Satellite Link" using
[Cursor / ], then press [ENTER].
U D
Confirmation message will appear.
Satellite Link Satellite Link
On On Off Off
HDD/DVD
DIGITAL AUDIO S-VIDEO
AUDIO OUT OUT OUT
HDD/DVD/VCR
AERIAL
L
COAXIAL
R
RF OUT