Remote Control - Ferguson Ariva 52E User Manual

4. Remote control

Due to the standardization of Ferguson equipment, the majority of these devices use the same
remote control unit RCU540 or RCU650. This means that not all keys are used by this
equipment model!
RCU
Turns the receiver on and sets it in standby mode.
Switches the sound on and off.
back Returns to the previous submenu, or exits the menu.
Returns to the previously displayed channel.
guide Displays the electronic programme guide.
menu Displays the main menu on-screen.
F1 Switching between the list of television and radio programmes.
F2 Changes the active satellite for the channel list.
F3 Used to switch between the resolution selected in the menu and the
default resolution of 576i. Allows the user to restore proper
functioning of the receiver following the selection of a resolution not
supported by the television.
F4 Returns to the previously displayed channel.
pvr Displays the USB menu, if a USB memory device has been
connected.
fav Displays a selection of favorite channel lists.
Used to change the volume level (lower, higher).
Switches to the next or previous channel.
info Displays information about the current programme.
text Switches on the teletext on-screen, if this is available.
audio Switching between soundtrack versions, if these are available.
sub Switches the on-screen captions on and off, if these are available.
find A quick search for channels according to successive name letters.
edit Not used.
ratio Change the aspect ratio of 16:9, 4:3, etc..
Buttons used to operate the recording, playback and time shift
mode functions.
102mini
52E
103mini
540 540
102E 202E
103 203
540 540
150Combo 250Combo
152Combo 252Combo
153Combo 253Combo
540 650
6