Attachment A - Glossary Of Terms - Ferguson Ariva 52E User Manual

Hide thumbs Also See for Ariva 52E:
Table of Contents

Advertisement

ATTACHMENT A - GLOSSARY OF TERMS

CA - Conditional Access – a coding system
used in order to protect transmitted data
against
unauthorised
protected
channels
subscribers.
CAM - Conditional Access Module – an
electronic device,
slots,
that allows access to coded pay-per-
view channels on a receiver equipped with a
CI socket.
CI - Common Interface – CI sockets of
digital receivers are used for the installation of
CAM conditional access modules,
allow
you
to
view
channels through these modules.
DVB-S
the
Digital
standard that defines modulation and error
correction in satellite transmissions. In DVB-S,
both the MCPC and SCPC modes can be used
by the operator to transmit channels. MPEG-2
is used as the transport stream.
Guide - Electronic Programme Guide – a
service
that
displays detailed
about current and future programmes on the
television screen.
FTA - Free-to-air – uuencoded radio and
television channels that may be received on
any television set.
LNB - low-noise block converter – a
converter - it converts satellite signals,
then sends them to the tuner through a
coaxial cable. The basic parameters are: gain,
noise factor and power consumption.
MCPC - multiple channels per carrier –
more than one signal (channel) is transmitted
on a given frequency (transponder). All of
these channels comprise a single data stream,
which
is
transmitted
following modulation.
Monoblock – a device that comprises two
converters and a DiSEqC switch in a single
housing,
which receives signals from two
satellites on similar orbits.
access.
Access
is
available
only
usually fitted with card
and thus
coded
pay-per-view
Video
Broadcasting
information
on
one
frequency
Pay-TV – Pay-per-view digital television,
which only subscribers have access. The
service is provided by satellite, cable, over
to
the ground or through the network.
to
SCPC - Single channel per carrier – only one
signal (channel) is transmitted over a given
frequency (transponder).
STB - Set-top box – an electronic device
connected to the television set,
processes
the
ground-based,
antenna. It enables the playback of video and
sound.
TP - Transponder – a type of wireless
communication device (transmitter),
automatically
strengthens and responds to a signal coming
in real time over a specific frequency. The
term is derived from the words "transmitter"
and "responder". Usually,
transmits
numerous
channels.
DiSEqC - (Digital Satellite Equipment
Control) a communication protocol,
between a satellite receiver and equipment
such as switches or positioners,
supports switching between television signal
sources and antenna control.
USALS – (Universal Satellites Automatic
Location
System)
and
protocol used between satellite receivers and
positioners,
control the positioner through the receiver.
Used in connection with the DiSEqC 1.2
protocol.
signal
received
cable or network satellite
receives,
each transponder
compressed
a
communication
which makes it possible to
to
which
from
the
which
modulates,
digital
used
which

Advertisement

Table of Contents
loading

Table of Contents