Table of Contents
Advertisement
Operating on Battery Power
Operating on Battery Power
computer to enter the power saving mode.
The following signals indicate that the computer is
in standby mode:
q
q
Warning: Unstored data is lost when you turn
! !
off the computer power in standby mode or
when the battery is drained.
To leave standby mode and return to normal
mode:
q
q
q
q
q
Important: If the computer detects a PC I/O card
! !
installed in the PC card slots, the computer will
not enter standby mode. Instead it will enter light
green mode. Light green mode is similar to
standby mode. It consumes very low power while
2-16
The buzzer beeps
The standby indicator flashes
Press any key
Move the active pointing device (internal or
external, PS/2 or serial)
Open the display cover
If the Resume Timer is set and matched, the
computer returns to normal mode
If an incoming modem event occurs and the
Modem Ring Resume On Indicator is enabled,
the computer returns to normal mode
Advertisement
Table of Contents
