Ironing Without Steam; Ironing With Steam; Vertical Ironing - Breville 2400W Manual

Filling your iron
1. Unplug your iron
2. Set the steam control
3. Open the Sure-Fill water tank inlet cover
4. Fill the water tank with ordinary tap water.
5. Don't fill above the MAX level mark. Check the level by standing your iron on its
heel.
6. Close the Sure-Fill water tank inlet cover.

Ironing without steam

Important: Your iron takes time to heat up and cool down. If you change the
temperature setting on your iron, you must give it time to adjust to the new setting.
1. Set the steam control to the no steam position (0).
2. Plug your iron in.
3. Rotate the temperature control
index mark
a
4. When the temperature indicator light

Ironing with steam

Warning: During steam ironing, if you do not allow your iron to reach the selected
temperature water may drip from the soleplate.
1. Fill your iron with water.
2. Plug your iron in.
3. The temperature control
hotter your iron, the more steam is generated.
4. When the temperature indicator light
temperature indicator light will turn on and off during ironing.
5. Adjust the steam control
6. The steam can be shut off at any time by setting the steam control to the no
steam position (0).

Vertical ironing

Warning: Never iron garments when they are being worn.
1. Prepare your iron as for steam ironing.
2. Hold your iron 15cm from the fabric.
3. Press the shot of steam button
each press of the button.
4
to the no steam position (0).
w
y
.
must be set within the
y
to select the desired steam output.
w
e
.
q
until the desired setting is aligned with the
comes on, your iron is ready to use.
t
ll
comes on your iron is ready to use. The
t
as required. Wait several seconds between
and setting. The
lll