Recovering Your Recovery Image Using Recovery And Utility; Non-Bootable Hard Drive) - Fujitsu STYLISTIC Q736 Operating Manual

Recovering Your Recovery Image Using Recovery and Utility

(for new hard drive or non-bootable hard drive)
If you have installed a new hard drive or your hard drive is not bootable, perform the following steps.
Note: You will need the Bootable disc and Recovery Image disc set for this recovery.
1. Power on your system. When the Fujitsu logo appears on the screen, press the
2. Insert the bootable disc in your DVD drive, then click OK.
3. Highlight the CD/DVD option from the Boot Menu and press
4. Select CD/DVD boot mode: Select UEFI Mode, if applicable and press
While the files are being loaded from the disc, the Fujitsu logo screen appears
followed by a progress bar at the bottom of the screen.
5. Choose your language, if necessary.
6. Three tool options appear: Diagnostics, Recovery and Utility. Select Recovery.
• Select Restoring the Factory Image (full hard drive recovery).
7. Click Next to confirm full hard drive restoration. All data on the hard disk drive will be deleted.
8. Agree to the EULA by selecting the Agree option and clicking Next.
9. Click Next on the Recovery Disc. Check screen to verify that the bootable
disc has been inserted into the optical drive.
10. The Checking for Recovery Disc screen appears followed by the prompt to insert the
first disc. Click OK to continue. Repeat this step for all discs. After all recovery discs
have been checked and the check has been completed, click Next.
11. Follow the prompt to reinsert the first recovery disc and click Next.
12. Click OK when you receive the final warning informing you that all data on hard
diskdrive C will be lost. This starts the recovery process.
13. Follow the prompts to insert the next recovery discs and click OK.
14. After the copying of the image to the hard disk drive completes the restore
process is complete, click Finish to restart the system. The computer will restart
automatically and then go through the first boot process.
Fujitsu
F12
.
Enter
Enter .
Appendix
key.
123