Daewoo DV6T811N Owner's Manual page 35

DVD-Video(USA)_DV6T811N-LT 02.4.16 2:38 PM ˘ ` 34
To Delete Channels Manually
After memorizing automatically channels, when the same broadcasting is memorized in more than two
channels, or you want to delete badly displayed channels, follow the procedures below.
Selecting cable or antenna viewing
34
Downloaded From Disc-Player.com Daewoo Manuals
1
Press [SETUP/ENTER] button and select "CHANNEL SET".
2
Select "Add/Remove Channels".
Move into "Add/Remove Channels" with
[ ] button and then, select the desired item
with [ ] button.
3
Select the desired channel and delete it.
Press [NUMBER] button of remote control to
select the desired channel to delete. When
[CLEAR] button is pressed, "ADDED" under the
channel number converts into "REMOVED".
4
Check the deleted channel.
To check the deleted channel, press [CH] button on remote control.
You must set the viewing mode for your VCR, choosing
either CABLE (cable system connection) or ANTENNA
(antenna connection). To set the viewing mode:
Press [>] to toggle the setting between CABLE and
ANTENNA in CHANNEL SET screen.
When the desired viewing mode is displayed, press
RETURN twice to exit.
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type: CABLE
Cable Box Setup
Output channel
selection: CH3
Move: Select:
End:RETURN
ADD/REMOVE CHANNELS
Channel 02
is now ADDED.
Remove: CLEAR
Select: End:RETURN
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type: CABLE
Cable Box Setup
Output channel
selection: CH3
Move: Select:
End:RETURN