Advertisement
Available languages
Available languages
Setup for XP Users
1. Insert the Belkin driver-installation CD into your CD-ROM drive.
After a few moments, the setup application should appear on
your computer screen.
Note: If the setup application does not appear, double-click "My
Computer", and then click your CD-drive icon. This will load the
setup-applications main page.
2. Click "Install driver" and choose either 32bit or 64bit then follow the
prompts to complete the software-install process.
3. a. Connect the power supply to the Hub.
b. Attach the mini-USB cable to the mini-USB port on the side of the Hub
and the other end to your computer's built-in USB port (Fig. 1). This will
allow your computer to recognize the Hub.
Fig. 1
(A)
Connect the
power supply
4. Wait approximately one minute for security to become enabled. A
prompt will indicate that the security setup is complete (Fig. 2).
Fig. 2
(B)
Connect
mini-USB cable
Setup for XP Users
2
Advertisement
