Command Set - JFW 50MS-192 Operating Manual

Identification Command
Syntax: ID <CR>
<CR> = carriage return
Description: This command returns the identification information for this system and is followed
by a carriage return and a line feed. It will list JFW Industries Inc, followed by the
JFW model number and the firmware revision level.
Examples: ID <CR>
Returns "JFW Industries Inc., Model 50MS-192, Rev 0 <CR> <LF>"
Notes: There must not be a space between the "I" and "D".
Command is not case sensitive, but must be terminated by a carriage return.
Set Input
Syntax: SIx y <CR>
x = Input port
Description: This command sets Input "x" to output "y".
Examples: SI1 1 <CR>
SI24 3 <CR>
Notes: There must be a space between the "x" and "y".
There must NOT be a space between the "SI" and the "x".
"x" must be between 1 and 24
"y" must be between 1 and 3 .
Command is not case sensitive, but must be terminated by a carriage return.
Read Input
Syntax: RIx<CR>
x = Input port
Description: This command reads Input "x"
Examples: RI1<CR>
Response à 1<CR><LF>
Notes: There must be a space between the "x" and "y".
There must NOT be a space between the "SI" and the "x".
"x" must be between 1 and 24
Command is not case sensitive, but must be terminated by a carriage return.
y = Output port <CR> = carriage return
Sets Input 1 to Output 1.
Sets Input 24 to Output 3.
<CR> = carriage return
Reads Input 1.
Rev 0, 7-27-06
Page - 5