R
epair
[3] -6. Disassembling/ Assembling of Gear Case Section (cont.)
(5) Set Switch unit in place on Gear case.
(6) Assemble the following parts to Housing (R) in numerical order:
1. Controller of Motor control unit
2. Terminal
3. LED circuit
4. Assembly of Gear case section and Motor control unit
Caution: • Put lead wires in place carefully so as not to pinch them.
• After putting Switch section in place, install Plate and Lens. Then fasten Housing (L) to (R) with seven
M3x20 Pan head screws. (Fig. 25)
• When disconnecting connectors drawn in Fig. 26, do not pull lead wires.
Fig. 25
Fix lead wires in the lead wire holders.
Fig. 26
LED circuit
Switch unit for Clutch
Plate
Switch unit in Trigger
Buzzer circuit
Fix lead wires in the lead wire holders.
Lens
Terminal
Blue, Grey
Yellow, White
Yellow, Blue
Purple, Yellow
Red, White
Switch unit for
rotation reverse
Positive: Red, Negative: Black
Terminal
P 9/ 14
Color of Lead Wires