Technical Specifications - AEG BSS 4826 Instruction Manual

English
54
Troubleshooting
Symptoms
Cannot switch the
speaker on
No audio signal during
playback through AUX
No audio signal during
Bluetooth connection
Cannot connect
speaker

Technical Specifications

Model: .......................................................................................................................................BSS 4826
Audio connection: ........................................................................................3.5 mm stereo jack plug
Net weight: ....................................................................................................................approx. 0.14 kg
Power supply: ...............................................................................................................................DC 5 V
Possible cause
Battery empty
Volume of the external audio
source is too low.
Volume of the device too
low.
Speaker is switched off
Speaker is not paired to the
audio source.
Volume too low
Pairing does not work
Audio source is turned off
Bluetooth is turned off on
the audio source.
Bluetooth version is not
supported.
Audio cable is connected.
Solution
Charge the battery ( Page 50)
Increase the volume of the external
audio source.
Increase the volume with the
button (9).
Switch the speaker on.
Check whether the connection
exists. If necessary, pair the speaker
to the audio source again.
Increase the volume on the
speaker
Increase the volume on the audio
source.
Check, whether the audio source
supports the A2DP protocol.
Turn the audio source on
Turn the Bluetooth function on in
the audio source.
Use another playback unit.
Remove the cable.