AEG BSS 4826 Instruction Manual page 50

English
50
Charging the integrated battery
The device is operated via the integrated lithium battery. Charge the battery as follows:
1. Plug the micro B USB plug of the charging cable into the jack (1) of the device. Con-
nect the USB plug to a powered-on computer. The indicator lamp lights up red and
the battery charges.
2. When the battery is fully charged, the indicator light will go out (7).
3. Remove the charger cable from the speaker and PC.
CAUTION:
Never leave the unit unattended when it is charging.
NOTE:
• The battery is only charged while the PC is switched on.
• Do not connect the player for a long period of time to a laptop computer discon-
nected from mains power Otherwise the laptop computer' s battery may be dis-
charged.
• The charging time varies according to battery use.
• When the system is not used for long periods, charge the battery at least every 6 to
12 weeks. The battery will also constantly discharge when switched off.
• When the battery is almost empty, the indicator light (7) will flash rapidly.
Location
Select a suitable location for the unit. A dry, even, non-slip surface on which you can easily
operate the unit is suitable.
Use
You have two ways to use the device: By cable or cordless via Bluetooth.
By cable
1. Connect the 3.5 mm stereo RCA cable to an external audio source. If required, use a
suitable adapter (not included).
2. Insert the other end of the cable into the AUX IN jack (2) on the unit. The indicator light
(7) lights up.
3. Switch the speaker on by pressing the
4. Control the volume on the external audio source.
/ button (6) for approx. 3 seconds.