Using The Alarms; Setting An Alarm - PURE Contour 100Di Manual

Using the alarms

Contour 100Di has two alarms which you can set to sound a tone, tune to a radio
station or play a track from your iPod/iPhone.

Setting an alarm

Press the Alarm button on the remote to show the
status of Alarm 1, press or
Alarm 2.
Press the Select button to choose and adjust either
alarm and press or and Select to adjust the
following settings:
Alarm on/off
Press or to choose between 'ON' (alarm sounds)
or 'OFF' (alarm does not sound) and press Select.
Time
Set the alarm time. Press or
then press Select. Repeat to set the minutes then
press Select.
Days
Set the days that the alarm sounds. Press or
to choose between: DAILY (every day), ONCE (no
repeat), WEEKENDS or WEEKDAYS (Monday to
Friday) then press Select.
Type
Press or to choose between: DIGITAL, FM, IPOD
or TONE (buzzer).
Station
If you've set alarm mode as DIGITAL or FM, press
or to choose between: LAST USED (Last station
tuned to) or select a favourite if you have any saved.
Note: NO PRESETS is displayed if you have not
created any favourites.
Volume
Press or to change the alarm volume then press
Select.
to show the status of
to adjust the hours
DR
DR
ON
DR
DR
DAILY
DR
DIGITAL
DR
LAST USE
DR
EN
11