Applications > Di And Do - Vivotek IP8166 User Manual

VIVOTEK
Applications > DI and DO
Digital input: Select High or Low as the Normal status for the digital input. Connect the digital input
pin of the Network Camera to an external device to detect the current connection status. You can
then select High or Low as the normal status.
Digital output: Select Grounded or Open to define the normal status for the digital output. Connect
the digital output pin of the Network Camera to an external device to determine the current status.
You can then select High or Low as the normal status.
Set up the event source as DI on Event > Event settings > Trigger. Please refer to page 103 for
detailed information.
User's Manual - 119