Wall Mount Installation - Depaepe Telecom HD 2000 URGENCE User Manual

Ringer
Ringer volume can be adjusted with the sliding switch
located on the right side of the telephone.
NOTE: Calls are indicated by the blinking LEDs.
Handset on hold position (Wall-mount position)
See page 4 and 5. This feature can be used to secure
the handset while waiting for someone to "come to the
phone" without going back to on-hook condition.

Wall mount installation

The HD2000 Urgence comes with a line cord and a
small plastic bag containing 1 thin screw and a foam
plug to be used for preventing theft or unauthorized
removal and 2 bigger screws for wall mount fixing.
1-Drill 2 holes as shown on the wall mounting layout.
Install the 2 bigger screws in those holes on the wall.
2- If the telephone must be secured against thefts or
unauthorized removal, drill a third hole as shown on
the wall mounting layout.
3- Align the 2 slots at the back of the HD 2000 in front
of the 2 screws and pull down.
4- If needed, install the third screw through the hole
located above the telephone (See pages 28 and 29) and
hide it with the foam plug.
Boucle sèche (Option)
Off-hook detection (Optional)
Boucle sèche (Option)
Off-hook detection (Optional)
26
Ligne/Line
Ligne/Line