Declaration Of Conformity - Bosch GSR Professional Original Manual

OBJ_BUCH-199-003.book Page 21 Wednesday, July 30, 2008 9:52 AM

Declaration of Conformity

We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 98/37/EC (until 28 Dec 2009),
2006/42/EC (from 29 Dec 2009).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider Dr. Eckerhard Strötgen
Senior Vice President Head of Product
Engineering Certification
11.07.2008, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Noise/Vibration Information
Measured values determined according to
EN 60745.
GSR 12 VE-2/GSR 14,4 VE-2/GSR 18 VE-2
Typically the A-weighted sound pressure level of
the product is 72 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed
80 dB(A).
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Drilling into metal: Vibration emission value
2
a =2.5 m/s , Uncertainty K =1.5 m/s
h
Screwdriving: Vibration emission value
2
a =2.5 m/s , Uncertainty K =1.5 m/s
h
GSB 12 VE-2/GSB 14,4 VE-2/GSB 18 VE-2
Typically the A-weighted noise levels of the
product are: Sound pressure level 90 dB(A);
Sound power level 101 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
Bosch Power Tools
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Drilling into metal: Vibration emission value
a =3.5 m/s
h
Impact drilling into concrete: Vibration emission
value a =13 m/s
h
Screwdriving without impact: Vibration emis-
sion value a
2
K =1.5 m/s
GSR 12 VE-2/GSR 14,4 VE-2/GSR 18 VE-2/
GSB 12 VE-2/GSB 14,4 VE-2/GSB 18 VE-2
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
2
,
Assembly
2
.
Battery Charging
A battery that is new or has not been used for a
longer period does not develop its full capacity
until after approx. 5 charging/discharging cy-
cles.
To remove the battery 7 press the unlocking but-
tons 6 and pull out the battery downwards. Do
not exert any force.
English | 21
2 2
, Uncertainty K =1.5 m/s ,
2
, Uncertainty K =1.5 m/s
2
=2.5 m/s , Uncertainty
h
.
2 609 932 649 | (30.7.08)
2
,