Sharp LC-32LD135V Operation Manual page 12

Volume
Equalizer:
Balance
Headphone
Sound Mode
AVL
Headphone/Lineout
(Optional)
Dynamic Bass
(Optional)
Surround Sound
(Optional)
Digital Out
Automatic Channel
Scan (Retune)
Manual Channel Scan This feature can be used for direct broadcast entry.
Network Channel
Scan (Optional)
Analogue Fine Tune
First Time
Installation
Clear Service List
(Optional)
Menu Features and Functions
Sound Menu Contents
Adjusts volume level.
In equalizer menu, the preset can be changed to Music, Movie, Speech, Flat,
Classic and User. Press the MENU button to return to the previous menu. Equalizer
menu settings can be changed manually only when the Equalizer Mode is in User.
This setting is used for emphasizing left or right speaker balance.
Sets headphone volume.
You can select Mono, Stereo, Dual I or Dual II mode, only if the selected channel
supports that mode.
Automatic Volume Limiting (AVL) function sets the sound to obtain fixed output
level between programmes (For instance, volume level of advertisements tend to
be louder than programmes).
When you connect an external amplifier to your TV using the headphone jack, you
can select this option as Lineout. If you have connected headphones to the TV,
set this option as Headphone.
Enables or disables the Dynamic Bass.
Surround sound mode can be changed as On or Off.
Sets digital out audio type.
Install and Retune Menu Contents
Displays automatic tuning options.
Digital Aerial: Searches and stores aerial DVB stations.
Digital Cable: Searches and stores cable DVB stations.
Analogue: Searches and stores analogue stations.
Digital Aerial & Analogue: Searches and stores aerial DVB and analogue stations.
Digital Cable & Analogue: Searches and stores cable DVB and analogue stations.
Searches for the linked channels in the broadcast system.
You can use this setting for fine tuning analogue channels. This feature is not
available if no analogue channels are stored.
Deletes all stored channels and settings, resets TV to factory settings and starts
first time installation. You can follow the instructions in the Initial Installation section
for more information on this process.
(*) This setting is visible only when the Country option is set to Denmark, Sweden,
Norway or Finland. Use this setting to clear channels stored.
English - 11 -