Download
Share
Print this page
OneControl Salamandra Tail Loop User Manual
  1. Manuals
  2. Brands
  3. OneControl Manuals
  4. Music Pedal
  5. Salamandra Tail Loop
  6. User manual

OneControl Salamandra Tail Loop User Manual

Hide thumbs
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
Salamandra Tail Loop
USER'S MANUAL
1

Advertisement

loading

Summary of Contents for OneControl Salamandra Tail Loop

  • Page 1 Salamandra Tail Loop USER’S MANUAL...
  • Page 2 1- Overview Top Panel Rear Panel (1) PGM1/PGM2 The two footswitches recall program 1/program 2 stored in the memory. Press again on a recalled program will master bypass the switcher. (2) Programmer buttons These are programmer buttons, 1", 2", 3 are to edit the order of the loops, "...

  • Page 3: Signal Chain

    (9) BANK/BUFFER display When press the BANK switch, i t shows the bank number. When a program is recalled by press PGM1/PGM2, it shows the buffer setup for 2 seconds, then it turns to show the current bank number. (10) INPUT Connect guitar here.

  • Page 4: Edit Programs

    3- Edit Programs 16 editable programs are stored in 8 banks, they can be recalled by pressing PGM1/ PGM2 switch. Each program have two status - recall/bypass, step on an recalled program will toggle to bypass. The program is editable only when a program is recalled (PGM indicator lights up).
  • Page 5 6- Bank Saramandra Tail Loop have 8 banks in 2 lanes, each lane have 4 banks (1~4). Press BANK switch will scroll up the bank number, the bank number blinks till a program is recalled. Hold the BANK switch for 2 seconds will change the lane and the display will have an extra “dot”...

  • Page 6: Specifications

    8- Specifications Dimensions........115(W) x112(D)X70(H)mm Weight................500g Power Supply..............DC9V Current Drain............max. 160mA Input impedance............500K ohm Output impedance............10K ohm 9- Typical Connection TUNER...