Toshiba e-studio 190F Quick Manual page 11

Info.
Code
638 Power failure occurred during the communication.
711 Incorrect LDAP settings.
712 Incorrect Email Address.
714 Cannot Log on to the LAN.
715 TCP/IP connection timed out.
716 Cannot logon to the designated SMTP Server.
717 Incomplete SMTP Protocol transmission. SMTP
Server's hard disk may be full.
718 Page Memory Overflow occurred while receiving
printing data. The paper size selected within your
application to print is larger than the paper size loaded
in the Paper Trays.
719 Received data via LAN is in a format that is not
supported.
720 Cannot connect to the POP Server (Incorrect POP
Server IP Address) POP Server is down.
721 Cannot connect to the POP Server. (User Name or
Password error)
722 Failed to obtain IP address from the DHCP Server.
725 DNS Server connection timed out. DNS Server is
down.
726 Received an error response from the DNS Server.
728 The document was sent to the Internet Fax in an
incompatible file format (PDF). TIFF file format is
required for Internet Fax.
Note: PDF file format is only used when using the
Scan-to-Email feature.
Continued on the next page...
Meaning Possible Action
Check the power cord and plug.
Check the LDAP Server Name, LDAP Log in
Name, LDAP password, LDAP Search Base.
Check the email address and send again.
Check the IP Address of the SMTP Server
with the Network Administrator.
Check the 10Base-T/100Base-TX cable
connection. An unexpected LAN problem
occurred. Contact the Network Administrator.
Check the Internet Fax Parameter settings.
Verify the IP Address, Default Gateway IP
Address, SMTP Server IP Address.
Check the SMTP Server IP Address setting.
Contact the Network Administrator.
SMTP Server is defective.
Contact the Network Administrator.
Check the document size and resolution.
Ask originator to resend in a supported size
and resolution.
Ask the originator to resend with a supported
file attachment format:
* In a TIFF-F format.
* Image data equivalent to recording paper
size.
Check the POP Server IP Address.
Contact the Network Administrator.
Check the POP User Name and Password or
the APOP settings.
Contact the Network Administrator.
Check the 10Base-T/100Base-TX cable
connection.
Confirm that the Internet Parameter and the
DHCP Server are correctly configured before
turning On or turning Off the power.
Contact the Network Administrator.
Check the DNS Server IP Address.
Contact the Network Administrator.
Check the POP Server Name.
Check the SMTP Server Name.
Change the Fax Parameter No. 177 (XMT File
Type) to "TIFF".
Page
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
11