Listening To Music Through A; Bluetooth Connection; Pairing The Unit With A Bluetooth Device And Listening To Music - Sony SRS-X77 Operating Instructions Manual

Listening to music through a

BLUETOOTH connection

Pairing the unit with a
BLUETOOTH device and
listening to music
You can listen to music from BLUETOOTH
device over a wireless connection.
Before using the BLUETOOTH function,
perform pairing to register your BLUETOOTH
device.
Note
 When pairing the unit with a BLUETOOTH device,
place the BLUETOOTH device within one meter
of the unit.
 When pairing the unit with a BLUETOOTH device,
connect the unit to the AC outlet or charge the
battery sufficiently.
 If your BLUETOOTH device is compliant with
one-touch connection (NFC), skip the next
procedure. See "Listening to music by one-touch
action (NFC)" (page 15).
1
Turn on the unit.
The / (on/standby) indicator lights
up in green.
2
Tap the (BLUETOOTH)
PAIRING button.
The (BLUETOOTH) indicator begins to
flash in white.
Tip
 From the factory, pairing information is not
stored in the unit. As such, when you tap
the (BLUETOOTH)
the (BLUETOOTH) indicator will begin to
flash quickly in white and the unit enters
pairing mode automatically. In this case,
proceed to step 4.
 When you tap the
PAIRING button, the unit tries to make
BLUETOOTH connection with the last
connected BLUETOOTH device. If the
device is nearby, the BLUETOOTH
connection is established automatically
and the (BLUETOOTH) indicator stays lit.
When you want to connect another
PAIRING button,
(BLUETOOTH)
BLUETOOTH device, terminate the current
BLUETOOTH connection by operating the
currently connected BLUETOOTH device.
3
Tap and hold the
PAIRING button until beeps
are heard.
The (BLUETOOTH) indicator begins to
flash quickly in white, and the unit
enters pairing mode.
4
Perform the pairing procedure on
the BLUETOOTH device to detect
the unit.
When a list of detected devices appears
on the display of the BLUETOOTH
device, select "SRS-X77".
If passkey entry is required on the
display of the BLUETOOTH device, enter
"0000".
Note
Stop playback on the BLUETOOTH device
before performing the pairing procedure.
Loud sound may be output when the
BLUETOOTH connection is established. In
addition, after the connection is established,
loud sound may be output at the time of the
first playback operation. It is recommended
to turn down the volume before starting
playback.
5
Make the BLUETOOTH connection
from the BLUETOOTH device.
When the BLUETOOTH connection is
established, the
indicator stays lit.
If the BLUETOOTH connection is not
established, repeat from step 3.
6
Adjust the volume on the
BLUETOOTH device, or tap the
VOL (volume) –/+ button to
adjust the volume.
(BLUETOOTH)
(BLUETOOTH)
13
US