Electromagnetic Compatibility - Philips BDP2205 Service Manual

8 Regulatory
8.1 Safety
Player shall as a minimum comply with the requirements laid down in IEC 60065:2001/A1:2005. This is
applicable to all countries. However, in countries having national safety standards, which differ from IEC60065,
the relevant national standards are applicable,
For European countries: EN60065(latest addendum)
For USA, Canada: UL60065
All Information technology equipmentshall as a minimum comply with the requirements laid down in IEC60950-
1:2001. This is applicable to all countries. However, in countries having national safety standardswhich differ
from IEC60950 the relevant national standards are applicable,
For European countries: EN60950-1:2001
For USA: UL1950
8.1.1 Laser Safety
All products shall as a minimum comply with the requirements laid down in IEC 60825-1:1993/A1:1997/A2:2001.
This is applicable to all countries. However, in countries having national safety standards, which differ from IEC
60825-1, the relevant national standards are applicable,
For EU: EN60825-1:1994/A1:2002/A2:2001
For USA: CDRH (Centre for Devices and Radiological Health) 21 CFR1040.10, etc.
8.1.2 Touch Current
Standard Reference: IEC 60065:2001/A1:2005
Measured in accordance IEC 60990:1999
Requirement
Tropical Climate: 0.35mA (peak)
Non-Tropical Climate: 0.7mA (peak)

8.2 Electromagnetic Compatibility

Player shall as a minimum comply with the requirements laid down in CISPR13 for emissionandCISPR20 for
immunity. This is applicable to all countries. However in countries havingnational EMC requirements which differ
from CISPR 13 the relevant standards are applicable,
Emission:EN55013:2001/A1:2003/A2:2006 for European countries
Immunity: EN55020:2007 for European countries
Radiated, radio-frequency, electromagnetic field immunity: EN 61000-4-3:2006/A1:2007
Mains Harmonics:EN61000-3-2:2006
Voltage Fluctuations and Flicker: EN61000-3-3:1995/A1:2001/A2:2005
EMF: EN 62311:2008
FCC15 part 15B for USA, Canada
In countries where EMC standards are not compulsorily enforced, CISPR13 must be enforced.
All information technology equipment shall as a minimum comply with the requirements laid down inCISPR22for
emission and CISPR24 for immunity. This is applicable to all countries. However in countries having national
EMC requirementswhich differ from CISPR 22, the relevant standards are applicable,
Emission: EN55022:1998/A1:2000/A2:2003for European countries
Immunity: EN55024:1998/A1:2001/A2:2003for European countries
Mains Harmonics: EN61000-3-2:2006forEuropeancountries
FCC part 15 for USA
2-16
Test Condition
•
Ambient Temperature: Normal (25°C)
•
Mains Supply: Nominal Voltage & Nominal Voltage +10%
•
State: Power On (Any mode)