Initial Preparations; Charging The Battery; Inserting The Battery And Memory Card; Charge The Battery - Canon PowerShot SX260HS Getting Started

Initial Preparations

Charging the Battery

Inserting the Battery and Memory Card

Terminals Battery Lock
Remove the cover and insert the
battery.
After aligning the o marks on the battery and

charger, insert the battery by pushing it in
( ) and down (

Charge the battery.


Once you connect the power cord to the
charger and plug the cord into a power outlet,
the lamp will light up orange.

When charging is finished, the lamp turns
green. Remove the battery.

For details on charging time and the number
of shots or recording time available with a
fully charged battery, refer to "Specifications"
in the Camera User Guide.
Open the cover.

Slide the cover (

Insert the battery.


While pressing the battery lock in the direction
of the arrow, insert the battery as shown and
push it in until it clicks into the locked position.

To remove the battery, press the battery lock
in the direction of the arrow.
).
) and open it ( ).
3