Hotspot; Bluetooth Settings - Samsung galaxy mega User Manual

Aways allow scanning: When enabled, Google Location Service and other apps can
o
scan for Wi-Fi networks, even when Wi-Fi is turned off.
Smart network switch: Auto switch between Wi-Fi networks and mobile networks.
o
Wi-Fi timer: Automatically connect or disconnect from a Wi-Fi network. Touch Wi-Fi
o
time to set the Starting time and Ending time.
Install certificates: If you have certificates stored on an installed optional memory card
o
(not included), you can use this option to install the certificates.
MAC address: View the phone's MAC address, needed for connecting to some
o
secured networks (not configurable).
IP address: View the phone's IP address (not configurable).
o
WPS push button: Set up a connection to a WPS (Wi-Fi Protected Setup) router or other
l
equipment.
WPN PIN entry: View the PIN used by your phone to set up a PIN-secured connection to a
l
Wi-Fi router or other equipment (not configurable).
Help: Get help using Wi-Fi.
l

Hotspot

Use your phone as an Internet Access Point (AP) using Hotspot. This allows other devices
(maximum of 8) to connect to the AP via a Wi-Fi network—giving the connected devices access to
the Internet.
Connect a Device
1. Press
and then touch
2. Touch OFF/ON to enable Hotspot.
3. On the target device, activate Wi-Fi. Then scan for Wi-Fi hotspots. Select the name of your
phone to connect.
4. On your phone, follow the prompts to connect to the targeted device.

Bluetooth Settings

Bluetooth is a short-range communications technology that allows you to connect wirelessly to a
number of Bluetooth devices, such as headsets and hands-free car kits, and Bluetooth-enabled
handhelds, computers, printers, and wireless devices.
For more information about using Bluetooth, see Bluetooth.
Settings
> Settings > Connections tab > Hotspot.
100