Connect A Bluetooth Headset Or Car Kit; Reconnect A Headset Or Car Kit - Samsung galaxy mega User Manual

Connect a Bluetooth Headset or Car Kit

You can listen to music over a Bluetooth stereo headset, or have hands-free conversations using a
compatible Bluetooth headset or car kit. It's the same procedure to set up stereo audio and hands-
free devices.
To listen to music with your headset or car kit, the headset or car kit must support the A2DP
Bluetooth profile.
1. Press
and then touch
2. Touch OFF/ON to turn Bluetooth on, then touch Bluetooth.
3. Make sure that the headset is discoverable, so that your phone can find the headset. Refer to the
instructions that came with the headset to find out how to set it to discoverable mode.
4. Touch Scan. Your phone will start to scan for Bluetooth devices within range.
5. When you see the name of your headset displayed in the Available devices section, touch the
name. Your phone then automatically tries to pair with the headset.
6. If automatic pairing fails, enter the passcode supplied with your headset.
The pairing and connection status is displayed below the hands-free headset or car kit name in the
Bluetooth devices section. When the Bluetooth headset or car kit is connected to your phone,
(Bluetooth connected) displays in the Status bar. Depending on the type of headset or car kit you
have connected, you can then start using the headset or car kit to listen to music or make and receive
phone calls.
Note: Due to different specifications and features of other Bluetooth-compatible devices, display
and operations may be different, and functions such as transfer or exchange may not be possible
with all Bluetooth-compatible devices.

Reconnect a Headset or Car Kit

When you have paired a headset with your phone, you should be able to reconnect it automatically
by turning on Bluetooth on your phone and then turning on the headset. However, sometimes you
will need to reconnect manually, such as when you have been using your headset with another
Bluetooth device.
1. Press
and then touch
2. Touch OFF/ON to turn Bluetooth on, then touch Bluetooth.
3. Make sure that the headset is discoverable.
4. Touch the headset's name in the Available devices section.
Web and Data
> Settings > Connections tab.
> Settings > Connections tab.
78